Effortless Spot Cleaner Maintenance: The Correct 2-Step Order After Every Use
Modern spot cleaners with **Hose Self-Cleaning** make post-cleaning hassle-free. However, following the correct order of operations is essential to save time and ensure complete hygiene.
The Golden Rule: Always run the Hose Self-Cleaning cycle before emptying your dirty water tank. This allows the machine to flush all internal hose debris directly into the dirty tank, so you only have to dump and clean the water tank once!
Step-by-Step Maintenance Workflow
Run the Hose Self-Cleaning Function
Before touching any water tanks, let the machine clean its own hose internal piping using fresh water from the clean tank.
- Attach Self-Cleaning Cap/Tool: Attach the self-cleaning accessory or hose cap to the brush head.
- Turn On Self-Clean Mode: Turn on the power or press the dedicated self-cleaning button for 10–30 seconds.
- Flush Trapped Gunk: Fresh water will rush through the flexible hose, pulling out trapped pet hair, lint, and dirty solution, channeling it straight into the dirty water tank.
- Check the Hose: Visually confirm that the hose runs clear. Now your hose is 100% sanitized without getting your hands dirty!
Empty and Wash the Dirty Water Tank
Now that the self-cleaning cycle has pushed all remaining hose dirt into the dirty tank, it’s time to empty it all in one go.
- Dump All Wastewater: Unlatch the dirty water tank, open the drain plug, and pour out the dirty water (which now includes the hose flush water).
- Rinse Thoroughly: Rinse the inside of the tank with warm tap water to remove sediment and debris.
- Rinse the Float Valve: Check the safety float valve inside the tank for trapped hair or foam, and give it a quick rinse.
- Air-Dry Completely: Leave the tank cap open and let it air-dry completely before storing to prevent mold and sour odors.
Post-Cleaning Quick Reference Chart
| Order | Component | Action Required |
|---|---|---|
| 1st | Flex Hose & Head | Run Hose Self-Cleaning Mode (flushes debris into dirty tank). |
| 2nd | Dirty Water Tank | Empty wastewater + self-clean residue, rinse, and air-dry. |
| 3rd | Clean Water Tank | Empty unused formula (if storing for a long time); rinse monthly. |
💡 Pro-Tip: Why Order Matters!
If you empty and wash your dirty water tank first and then run the hose self-cleaning cycle, dirty water from the hose will drain into your freshly washed tank—forcing you to clean the dirty water tank a second time! Always self-clean the hose first, then clean the tanks last.